ECO-PARKING Grass Grid Paver allows up to 16 tonnes of axle load and provides ground reinforcement and permeable paving solution for construction sites, private roads, access roads, cycle paths, embankments, livestock facilities and green roofs.
Tried, tested and sustainable ECO-Parking Grass Grid Paver can quickly and easily be installed to create attractive, permeable and low maintenance driveways and other hardstanding areas.
The three-dimensional, honeycomb grid (333x333x40mm) incorporates a proven interlocking system that can simply be laid over any area of stable ground, that once in-filled can withstand constant pedestrian and vehicular traffic of up to 20 tonnes axle load.
Filled with attractive coloured stone, pea gravel or seeded soil, the finished aspect is aesthetically pleasing making ECO-Parking particulary suitable for locations where the introduction of hard landscaping would have a visually negative impact.
Structural integrity is guaranteed as the frost and UV resistant ECO-Parking system will remain dimensionally stable and in all climatic conditions making it the ideal choice for all locations requiring erosion prevention, ground re-enforcement/stabilisation.
ECO-Parking is extremely versatile and being easy to cut will not impede the planting trees and shrubbery or the inclusion of railings, fences and other physical barriers.
Manufactured in the UK from 100% recycled material that wont crack, corrode, rot or splinter, ECO-Parking has the environment credentials to reduce the carbon footprint of any project.
- Quick and easy to install
- Proven connection system
- System reinforcement with natural drainage
- Minimal maintenance
- Non-slip and crack proof
- Weatherproof and environmentally friendly
- Frost and UV resistant
- Dimensionally stable
- Prevents gravel migration
- High strength
- (up to 250t/m)
- Up to 20 tonne axle load or with the new ECO-Parking plus, 30 tonne axle loads
- Non expanding
- Low transport and handling costs
- Green Parking
- Emergency Vehicle Access
- Green Roofing
- Temporary and Permanent Roadways
- Hard Standing
- ..Much more
|Dimensions:||33 cm x 33 cm x 4 cm|
|Wall thickness, Wall height:||3 mm, 40 mm|
|Weight per tile:||0.57 kg|
|Weight per m²:||5,13 kg|
|Compressive strength:||Up to 10 t axle load in accordance with DIN 1072|
|Loadbearing capacity:||Up to 320 tonnes per square metre|
|Natural stability:||Temperature range -50°C up to 90°c|
|Dimensional changes:||Approx. 0,5 % (at a standard temperature +20°c up to 80°c)|
|Environmental compatibility:||Harmless, groundwater neutral, weatherproof and UV resistant|
|Solubility:||Resistant against acid and leaching, alcohol, oil and petrol (strewing salt, ammonia, acid rain etc.)|
|Installation:||100 m² per person per hour|
|(S)100% recycled with no added colours||(M)98% recycled with colourants to produce a green or black product||(H)95% Recycled using segregated material to product a consistent colour|